SignTools CUT Settings

The SignTools 3 Cut Settings dialog box makes setting up as easy as 1...2...3.

1. Choose your cutter from a drop down Plotter List containing 140 popular cutter plotters as  well as generic HP-GL drivers if your cutter is not listed.
2. Choose your port. Serial COM Port or Parallel LPT Port

3. If you are using a Serial (Com) port, click on the Properties button and configure the port.

For cutters that are on a networked system, the SignTools 3 User Guide contains instructions  to help you with setting up shared cutters.

With both the Cut and Cut Settings dialog boxes, we have endeavored to make it as simple  as possible without cluttering them up with too many options. 

SignTools already contains all of the tools and options you may require for cutting such as Weedbox, Multicopy, Registration Marks, Color Separator and Vinyl Saver.  

After more than  3  years of research and customer feedback we decided to keep these tools separate from the  Cut tool.   This gives you much more flexibility and an easier user interface without complicating the task of cutting.

You can setup SignTools3 for Metric or Inches operation or switch between the two.